The EmulsiFlex-C3 has a capacity of 3L/hr. The flow rate is independent of homogenizing pressure. Minimum sample volume of 7mL with a holdback volume of less than 1mL.
Pressure: Adjustable between 500-30,000psi(30-2,000bar), which is high enough for virtually every homogenization application. Pneumatic pressure control with virtually no air consumption. Pressure transducer for precision pressure measurement is also available.
Unique Design: The EmulsiFlex-C3 has an electric gear motor driven, single-acting, high-pressure pump. Almost noiseless. Runs with 220V or 110V power. The motor is only 1HP (0.75kW). There are no “O”-rings in the high pressure product path. The instrument can be installed and run almost anywhere.
Temperature Control: AVESTIN provides stainless steel heat exchangers to control inlet and outlet temperatures. Filter/Extruder: The EmulsiFlex-C3 can be equipped with a
high pressure filter/extruder. Applications include the extrusion of emulsions or liposome through membranes and sterile filtration at high pressure. Homogenizing Valve: The EmulsiFlex-C3 is delivered with a dynamic homogenizing valve. The valve can be easily disassembled for cleaning or inspection. Submicron particles or droplets with diameters less than 50nm and extremely narrow size distributions can
Cleaning/Sterilization: The equipment is Steam-InPlace (SIP) sterilizable. It is suitable for clean room and GMP manufacturing. All wetted parts are autoclavable. For inspection, all wetted parts can be disassembled and reassembled in a short time. Applications: Pharmaceuticals, chemicals, cosmetics, coatings, inks, food, etc. Suitable for clean room and GMP manufacturing.
• Capacity: 3L/hr @60Hz
• Pressure: Up to 30,000psi / 2,000bar
• Min. Volume: 7ml
• Electric Motor Driven
First time users must order a tutoring session.